Peumatic Grouting pump is designed for pressure and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes in order to reinforce the free rock mass. The most grain size can not exceed 0.2 mm.
Grouting pump operation and upkeep is simple, safe and reliable. This pump is used in mines working underneath troublesome conditions as a outcome of it’s reliable and explosion-proof.
Basic Pneumatic Grouting pump embrace: An air inlet, the pneumatic cylinder, mounting base body and stand, stress gauge, pumping cylinder, outlet with fast release coupling and wheels.
How ร้านซ่อมเครื่องวัดความดันโลหิต works
Pneumatic strain within the air cylinder exerts a high pressure on the grout mixture which leads to ejection of grout with a high strain and velocity. The valves of the air cylinder within the pump function mechanically to actuate the cylinder. The pneumatic cylinder then moves the plunger up and down to complete the pumping cycle.
Pneumatic grout pump may be driven even without Electrical power provide in remote areas by using engine pushed compressor.
Applications
The pump is majorly used in construction and mining business for injecting material into wide and medium dimension hole in beams, columns ,basement walls and flooring, raise shaft concrete wall fill-up and so forth. In mining เกจวัดแรงดันไนโตรเจน ‘s used to fill up cement resolution the place there’s a gap exists between structure and rock and for soil stabilization.
Detachable design tends to simple maintenance and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work
This pump is widely utilized in tunnels, coal mine, bridges and dams, constructing basis, and other underground initiatives, and inflammable, explosive sites and different bad setting.
It has application in chemical industry additionally to pump out chemical slurries.
The pump is electricity free so, can be used at any site condition whether it’s rural or city.
Mining Pneumatic Grouting pump has a bigger discharge slurry adjustment vary. Generally the final quantity of the grouting volume is eight or10 times of the amount at first. And the ultimate grouting quantity proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specifically designed for high-pressure grouting. And it adopts full hydraulic drive, it’s stress and flow may be adjusted based on the requirements of grouting,(The circulate of grouting pump is 0-100L/min, pressure of discharge is 0-10MPa).besides, This Pneumatic high-pressure grouting pump can be used for grouting single or double fluid.
High-pressure grouting pump is mainly used for highways, railways, water and electricity, construction, mining etc. ground/underground building.
Benefits
Mining Pneumatic Grouting pump has some nice advantages of low power consumption, small vibration, low noise, small size, high effectivity, reliable efficiency, stress and move management, lengthy life and so forth. Common mine grouting pump has pneumatic injection pump, twin fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump can be Light weight and with a wheelie design it may be carried simply. It is designed for straightforward operation and low upkeep. Last however not least its spare elements are easily available.
Share