Dual range pistons for pressure calibration

Dual piston deadweight testers can greatly enhance a lab?s capability to calibrate wide pressure ranges with the best accuracy. With transducers and devices under test (DUTs) that have a broad measuring range, calibration could be a lengthy process, as you need to change pistons among test points so that you can calibrate its entire range.
However, a dual piston deadweight tester has a high range piston and low range piston, which allows the technician more flexibility and efficiency when it comes to calibration. Overjoyed comes from decades of innovation and customer interaction to find a solution for industry needs.
Formula for pressure calculations
Since the Industrial Revolution, high accuracy pressure measurement has been a key requirement in process industries. Pressure measuring instruments like gauges were employed to measure and monitor pressure conditons. They need to be calibrated against instruments of a higher amount of accuracy. Deadweight testers (generally known as pressure balances) are high accuracy instruments found in the calibration of electronic or mechanical pressure instruments. Hesitant of a deadweight tester is really a precisely manufactured piston-cylinder system, onto which a mass load is applied to be able to generate the average person test points in a calibration.
The mass load is proportional to the target pressure, which is achieved through optimally graduated masses. The design of the entire calibration system, as well as the precise manufacturing of the piston and cylinder, ensure quality performance with long free-rotation time and low sink rates of the piston. With measurement uncertainties right down to 0.002% of reading, deadweight testers are the golden standard in calibration.
A deadweight tester typically consists of a single piston-cylinder system. This involves mass sets to be changed as a way to calibrate multiple or wide measuring ranges. This could become a cumbersome process, one which requires many resources. In 1953, the entity today referred to as DH-Budenberg pioneered the initial dual range piston-cylinder technology with two pistons housed concentrically in one unit. DH-Budenberg was later acquired by WIKA in 2011. The first design included 1/8 in2 (low pressure) and 1/180 in2 (high pressure) pistons housed in one unit. Utilizing a single mass-set it had been now possible to create two points of equilibrium at 55 bar (low pressure) and 550 bar (ruthless) respectively. This is followed with the release of high pressure variant which could generate pressure upto 1100 bar.
Explanation dual piston design
The first dual piston design was largely made of tool roll, and had an accuracy of 0.03 % of the pressure being measured in the typical model and 0.05 % in the high pressure model. In dual piston calibration, the strain on the low pressure piston is used in the auxiliary piston, that is directly linked to the weight carrier. When correct pressure is obtained, the piston head skirt floats within the low range or ?blue band.? To reach ruthless, the pressure is increased and the reduced pressure piston rises until a knife-edge on the bottom flange makes a seal against the low pressure cylinder and acts because the high pressure cylinder. Because the low pressure piston will not contribute to the overall weight of the piston and weight carrier, the weight carrier accumulates the auxiliary weight to pay. When correct pressure is achieved, the piston head skirt floats within the high range or ?red band.?
This iconic, patented DH-Budenberg red and blue band piston-cylinder system was re-engineered later with both piston and cylinder components made of tungsten carbide. With the refinements in pressure generation and piston manufacturing processes, dual ranges are now available up to 1,400 bar with accuracies down to 0.006 % of reading.
These developments in dual piston technology made deadweight testers, such as DH-Budenberg?s CPB5800 Hydraulic Pressure Balance, the premier deadweight tester for industrial applications. It is especially useful for calibrating a transducer with a broad measuring range, while maintaining the high accuracy for testing and calibration. With the use of only a single mass set and calibrating instrument, this technique can automatically switch between multiple test points of high and low pressure, making pressure calibration seamless, efficient and economical.
Note
Further information on our pressure balances are available on the WIKA website.