The significance of supervised monitoring modules used in management and monitoring of extinguishing techniques

In many places from chemistry laboratories to industrial amenities, in order to ensure the safety of life and property against a potential fireplace hazard, extinguishing systems are used along with detection and alarm methods. เกจวัดแรงดัน250bar can additionally be extraordinarily necessary that the extinguishing techniques put in could be triggered by the hearth extinguishing control panel, to have the ability to get rid of a potential hearth with early intervention.
In order to meet these needs, and with 35 years of sectoral data and expertise, Mavili Elektronik provides:
Maxlogic Conventional Fire Extinguishing Control Panel working in accordance with the cross-zone detection principle;
Maxlogic Extinguishing Status Indicator Unit, which permits the distant performance of the symptoms and controls on the Control Panel;
Maxlogic Extinguishing Output Expansion Panel;
Maxlogic Extinguishant Manual Release Button, which permits the extinguishing course of to be started manually and remotely; and
to make sure that the extinguishing course of may be paused, Maxlogic has produced the Extinguishant Emergency Stop Button.
All these units are produced using surface-mount expertise and are aimed toward making the automation of the extinguishing system and fire and fuel detection system perfect.
Image copyright: Mavili
Mavili Elektronik develops its merchandise by at all times considering the needs of the installation. In instances that require the mixing of the extinguishing system with the intelligent addressable hearth detection system, it offers options through the monitoring modules that also have a ‘supervised’ choice.
Supervised monitoring modules play an necessary position in controlling the continuity of the cable connection between the loop and the extinguishing system. Failure to detect a attainable open or short circuit in the wiring between the contact monitoring modules and the peripheral systems may cause disruption of the triggering, with probably crucial consequences. For this cause, when choosing monitoring modules, it should be taken under consideration that they have supervised features.
Image copyright: Mavili
Since Maxlogic intelligent addressable fireplace detection and alarm management panels are continually communicating with ‘supervise’ contact monitoring modules related to cable loops and compliant with EN 54-17 and EN 54-18 standards, it makes it easier to monitor conditions such as open circuits and short circuits that may occur within the system. Many tasks may be carried out in the fire extinguishing set up, such because the control and monitoring of all valves that can interrupt the move of water, water move alarm switches, stress swap, and electrical or diesel hearth pumps.
By adding two contact monitoring modules to 2 separate relay outputs located above the Maxlogic Conventional Fire Extinguishing Control Panel, one of many modules can be used to control errors and the other to control the fire situation, monitoring and control of the extinguishing system through an clever addressable hearth detection and alarm system could be performed effectively.
For extra data, go to

Leave a Comment